IPEnergizer.com

How it works

The IP Energizer® is a Wi-Fi enabled electric fence energizer that can be monitored and controlled from anywhere in the world. To achieve this, the IP Energizer® connects to your home Wi-Fi network and from there to the Internet. Controlling it is easy, simply download our IP Energizer Controller App, enter your IP Energizer's unique password and start controlling and monitoring your electric fence.

Real-Time Notifications

Get notifications when someone turns your IP Energizer® off, or if a fence fault causes the voltage to drop below a minimum level that you set.

Monitor and Control Multiple Electric Fences in Real-Time

Using the IPEnergizer Controller App, monitoring and controlling your Electric Fence is simple. Data is only sent when values change, saving you on data running costs.

Monitor and Control Multiple Fences and Share them with Others

The IPEnergizer App allows you to control multiple IP Energizers. You may allow others to share your fence control if you give them the password.

Simple Setup

The IPEnergizer Controller App pairs and configures your IPEnergizer to connect to your home Wi-Fi network in a few simple steps

Why not try controlling an IP Energizer® yourself?

Below is a live feed from an IP Energizer® in our office.

* Note there can be up to 10 seconds delay

To learn how to setup and control a site see the 'Control it' section below for either the IOS or Android application.
To configure an IP Energizer see the 'Configuring an IP Energizer' section for either the IOS or Android application.


Control it:

Android Instructions

Download the IP Energizer Controller App for Android

Go to settings, press 'Add Site'

Enter in a site name such as 'Horse Paddock'

Enter in the following serial number: 266576 and password: 266576javacherry

Choose an alarm threshold voltage. If the voltage falls below this level you will receive notifications, and press OK.

Now you should be able to click on your newly created 'Horse Paddock' site to view and control our IP Energizer®.

Back To Top

IOS Instructions

Download the IP Energizer Controller App for IOS

Go to settings through the navigation bar, press 'Add Site'

Enter in a site name such as 'Horse Paddock'

Enter in the following serial number: 266576 and password: 266576javacherry

Choose an alarm threshold voltage. If the voltage falls below this level you will receive notifications, and press OK.

Now you should be able to click on your newly created 'Horse Paddock' site to view and control our IP Energizer®.

Back To Top

Configuring an IP Energizer

Android Instructions

Go to 'Settings' and click 'Configure IP Energizer', ensure that your IP Energizer is turned on.

If successful you will be prompted to enter your Wi-Fi SSID and Password as well as the Energizer's Serial number and a password to connect to it and then click 'Submit'. You are able to select your network under 'WiFi Networks'

Refer to the Android Instructions for creating a site with your newly configured Ip Energizer

Back To Top

IOS Instructions

Go to 'Settings' through the navigation bar and click 'Configure IP Energizer'

Leave the app and go to your wi-fi settings and select the network connection: 'IPEnergizer', ensure your energizer is turned on. Now return the IP Energizer App.

Enter your Wi-Fi SSID and Password as well as the Energizer's Serial number and a Password to connect to it and then click 'Submit'

Refer to the IOS Instructions for creating a site with your newly configured Ip Energizer

Back To Top